Gear Heads and Accessories

Reference: 07-472

Clearing Saw gear head lower flange Stihl FS200, 250 (07-472) Blade lower mounting flange between fastening nut and blade. For models: Stihl FS200, FS250

Reference: 07-456

Clearing Saw Gear Head Stihl FS120, FS200, FS250 (07-456) For models:Stihl FS120,FS130, FS200, FS240, FS250

Reference: 07-459

Brand: ProForest

ProForest Clearing Saw Gear Head Efco 8460, OleoMac 746 (07-459) Complete, includes gear head and blade mounting parts. For models: Efco 8460, 8550 BOSS OleoMac 746

Reference: 07-476

Brand: ProForest

ProForest Clearing Saw gear head flange Husqvarna 545FX (07-476) Blade mounting flange between gear head and blade. Center hole 25.4 mm. For models: Husqvarna 545Fx, 545FxT (Gear Head 07-455)

Reference: 07-453

Brand: ProForest

ProForest Clearing Saw Gear Head Husqvarna 240R, 245RX (07-453) Complete, also includes blade mounting flanges and blade nut. Center hole 25.4 mm. For models:Husqvarna 240R, 245RX, Jonsered GR41, RS44, Partner B405, B450.

Reference: 07-454

Brand: ProForest

ProForest Clearing Saw Gear Head Husqvarna 250RX, 252RX  (07-454) Complete, also includes blade mounting flanges and blade nut. Center hole 25.4 mm. For models: Husqvarna 250RX, 252RX Jonsered RS51, RS52

Reference: 07-457

Brand: ProForest

ProForest Clearing Saw Gear Head Husqvarna 345R, 345RX (07-457) Note! blade attachments are not included. Use parts for your old gear head. For models: Husqvarna 345R, 345RX

Reference: 07-455

Brand: ProForest

ProForest Clearing Saw Gear Head Husqvarna 545 F/FX/FXT (07-455) Also fits older 345FX and 345FXT models, but blade attachments may need to be replaced. If required, the blade mounting flanges can be found under part numbers 07-476 and 07-477.The blade attachments are not included in the delivery but must be taken from an old gear head or purchased...

Reference: 07-471

Brand: ProForest

ProForest Clearing Saw gear head lower flange Husqvarna 25,4 mm (07-471) Blade lower mounting flange between fastening nut and blade. For newer gear heads with a blade center hole of 25.4 mm (also suitable to replace the old 20 mm, but blades must be replaced). For models: Husqvarna 240R, 245RX, 250RX, 252RX, Jonsered GR41, RS44, RS51, RS52, Partner B405,...

Reference: 07-477

Brand: ProForest

ProForest Clearing Saw gear head lower flange Husqvarna 545FX (07-477) Blade lower mounting flange between gear head and blade. Outer diameter 45 mm. For models: Husqvarna 545Fx, 545FXT (gear head 07-455)